• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

150cc DIASIL, 178 cc and 188 cc SPECIAL BOREUP KITS

H

haen

Super Veteran
the new forum system makes me wondering how to send pm :)... just contact me via Yahoo Messenger : haentiara please
 
jimpie

jimpie

Super Veteran
sir hean please update your price to the following...

*PACKAGE II : 178 CC 62 MM KIT (BLOCK, PISTON, PISTON WRIST PIN, PISTON RING SET)

Description : 62 mm forged piston, special steel bore, water jacket, piston rings, piston pin, gaskets
still use stock 14 mm conrod plug and ride

Special 62 mm forged piston with special cyl block.. no leak, no heat up issues


*PACKAGE I : 150 cc KIT

1. BASIC KIT

1. Piston ring set
2. Piston kit
3. Piston pin
4. Cyl block
5. Cyl gasket (lower)
6. Cyl head gasket
7. Water Pump O-ring
8. STAGE 2 CAM
9. Circlip
10. Valve Spring

2. 150 cc TUNED UP KIT, BIG VALVE HEAD READY with modification at :

1. Modified piston
2. Shaved block
3. SPECIAL POWER CAM 5.8 mm lift in replacement of the Stage 2 cam

please include the payment process


thanks sir hean
 
H

haen

Super Veteran
Hi guys, just wanna share...

+3.5 mm stroke.. 65,7 mm stroke x 62 mm bore.. cryogenic treated parts..


Spec :
- Mikuni TM28 SUDCO Carburetor
- KITACO Intake Manifold
- SKF Cryo Treated C4 Crank Bearing
- Faito Auto Clutch Crankshaft
- TKRJ Conrod
- Semi Close Ratio (Full)
- 22/18 Big Valve Head
- Cryogenic Valve Spring
- 62 mm HiSpeed R type piston
- 5 mm block gasket
- TDR CDI
- NGK Laser Iridium CR9EIA-9
- 5.8 mm camshaft
- Temporarily Custom Modified Stock Exhaust Pipe due to Traffic Regulation



Piston type R modified..



Custom Engine mounting..



Layer cake gaskets :D

 
wrg2867

wrg2867

New Member
sir haen,
i need this item..pm me for the price and details plz..
1.big valve head(porting include)
2.62mm forged piston
3.suitable cams(latest perhaps..)

etc.
4.proper exhaust
5.carb..
 
SJLUsniper

SJLUsniper

Super Veteran
bro im
haen said:
150 CC DIASIL SPECIAL RECIPE PACKAGE :
150 cc KIT touched and TUNED on some parts by me (after Jan 1 st, 2009 purchases)



+

This CAM



+ VALVE SPRING

DYNO TEST spec :

Mikuni TM28 PJ 17,5 MJ 215
TDR Cone Air Filter + stock airbox
CLD Competition Pipe Header + NOB1 3BOLD silencer
Power Cam 5.8
Cryogenic Vixion Valve Spring
Head 22/19 Flowbench ported
Intake Kitaco
CDI TDR + Rextor
Final Gear 15-39
Gearbox Close Ratio :
1st - 33/13
2nd - 29/17
3rd - 23/17
4th - 23/21
FAG Hi Speed bearing

The kit are :

KIT UPDATE

PACKAGE I : 150 cc KIT

1. BASIC KIT

1. Piston ring set
2. Piston kit
3. Piston pin
4. Cyl block
5. Cyl gasket (lower)
6. Cyl head gasket
7. Water Pump O-ring
8. STAGE 2 CAM
9. Circlip
10. Valve Spring

2. 150 cc TUNED UP KIT, BIG VALVE HEAD READY with modification at :

1. Modified piston
2. Shaved block
3. SPECIAL POWER CAM 5.8 mm lift in replacement of the Stage 2 cam
4. Protec GROUND ULTIMATE coil

DYNO TEST RESULT FOR THE TUNED UP KIT with ABOVE TEST SPEC



DYNO TEST RESULT FOR THE TUNED UP KIT with STOCK CARB (BORED OUT to 23.5 mm), STOCK CDI and OPEN PIPE



Uploaded with ImageShack.us

ALL ORIGINAL PARTS !!! contact me by email for pricing and shipping..

PACKAGE II : 180 CC 62 MM KIT (BLOCK, PISTON, PISTON WRIST PIN, PISTON RING SET)

Description : 62 mm forged piston, special steel bore, water jacket, piston rings, piston pin, gaskets
still use stock 14 mm conrod plug and ride

Special 62 mm forged piston with special cyl block.. no leak, no heat up issues

PIC HERE : http://www.facebook.com/photo.php?pid=4221883&id=320505998430

DYNO TEST RESULT



Uploaded with ImageShack.us

Instantly you'll get 150cc, 180 cc and superb acceleration...but the best thing is...
IT'S TROUBLE FREE AND POWER PROVEN YET STILL SAFE FOR DAILY AND LONG RIDE !!!

These came from a long research which costs time, money and lot of effort..

NEW ! CRYO TREATMENT at small ADDITIONAL COST

What's to be treated ? Here they are :

1. Piston
2. Piston ring
3. Piston pen
4. Cyl block

and what is this CRYO TREATMENT actually ?
Read here :

http://www.metal-wear.com/

pm me for price..
Guaranteed to make u cry... gear two on my 86kg weight reaches 85 km /h FAST !!! EDIT : now my weight is 92 kgs... :D

So there's what are available for now..

I'm on Indonesia..

Pay by PayPal, wiretransfer or Western Union

contact pm or Yahoo messenger ID haentiara

Hi guys, just wanna share...

+3.5 mm stroke.. 65,7 mm stroke x 62 mm bore.. cryogenic treated parts..


Spec :
- Mikuni TM28 SUDCO Carburetor
- KITACO Intake Manifold
- SKF Cryo Treated C4 Crank Bearing
- Faito Auto Clutch Crankshaft
- TKRJ Conrod
- Semi Close Ratio (Full)
- 22/18 Big Valve Head
- Cryogenic Valve Spring
- 62 mm HiSpeed R type piston
- 5 mm block gasket
- TDR CDI
- NGK Laser Iridium CR9EIA-9
- 5.8 mm camshaft
- Temporarily Custom Modified Stock Exhaust Pipe due to Traffic Regulation



Piston type R modified..



Custom Engine mounting..



Layer cake gaskets :D

Click to expand...
sir, interested buyer here.. no.2 150cc package.. how much is it?? txt me thru my cp number 09152480448.. coz i cant be olweiz on line.tnx
 
D

dre_186

New Member
just a question. what is the average fuel consumption on the kits respectively? do they still can hit 45-50km/li?
 
zcbitik

zcbitik

Super Veteran
please pm me for the price of package 1 (150cc) and package 2 (180cc), please include shipping to Philippines , are all this for plug and play? what I mean is that.. there's no need for any machine shop? thanks
 
supermikoman

supermikoman

Super Veteran
Bro with these kits can we still use our motorcycles for daily rides? Or its just for racing? Because my friends say that having a modified engine will only give me headaches. Wont we encounter any problems? Please be honest. Thanks in advance sir haen
 
H

haen

Super Veteran
@supermikoman : i already using 200 cc for daily.. with fuel consumption 1 l for 35-40 km on 28 mm carb.. i think if you do it rite.. no problem :D
 
D

dre_186

New Member
thanks haen. looks good over FC-power. much like modified mios/nouvos. just keep the right hand light. lol :)) thanks again.
 
DreamersDesire Kips

DreamersDesire Kips

New Member
dear mr haen. i am charlie from singapore. i am riding a krr150 here. i been searching for cheetah power 350 cdi but not able to find in sg n jb.. i am thinking is it possible to buy from u and shi/courier it to singapore? Thanks for your time. my number is 91561609.

Have a great day
 
DreamersDesire Kips

DreamersDesire Kips

New Member
dear mr haen. i am charlie from singapore. i am riding a krr150 here. i been searching for cheetah power 350 cdi but not able to find in sg n jb.. i am thinking is it possible to buy from u and shi/courier it to singapore? Thanks for your time. my number is 91561609.

Have a great day
 
Blaster

Blaster

New Member
Sir Haen,

Good day! May I have the prices for your 150cc 188cc and 200cc kits? Are these all bolt on/plug and play, sir?
Do the kits retain all the regular features of the Yamaha 135 Diasil such as reliability and liquid cooling?

Many thanks for the information

Blaster
 
You must log in or register to reply here.
Top