• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

My Sniper Mx 135, Mx King & R3 "documentary"

JapSpeed

JapSpeed

Super Veteran
ayay... baliktad pala pgkaka install ko kahapon. yng una akala ko yng mga guhit sa pa taas advance and mga guhit sa baba retard. baliktad pgka intende ko..
 
Last edited:
JapSpeed

JapSpeed

Super Veteran
yng timing ko kasi dait nka retard na dahil ng tabas ng block.. gs2 ko sana ibalik sa standard timing to test how's the result.. ito po yng pic kahapon. pg start ko ng engine. TOK TOK TOK TOK sabi ng piston at valves.. "ouch" bakit ganun? cguro di kinaya ng 1mm pocket ko yng duration at lift ng cam..:mad::mad:
 
Last edited:
sprinter777

sprinter777

Member
JapSpeed said:
bro ilang mm ba lift ng spec v cam?
Click to expand...
sir 5.7 ata or 5.8...
as per your pic sir..the timing is advanced which simply means your intake valve have piston contact..need more clearance sir..
sir delikado pag may tok tok sounds..malamang sumabog yan..you need at least 1.2mm clearance at that timing...
 
shedric

shedric

Super Veteran
pa-OT ako sir, ganyan nangyari sakin last week, tok-tok sound
as of now naka stock muna sa house MX ko, ndi ko na pina-start bka lumaki
pa ang sira, anu kaya ang sira nya? bandang head ang tok-tok sound e
 
JapSpeed

JapSpeed

Super Veteran
shedric said:
pa-OT ako sir, ganyan nangyari sakin last week, tok-tok sound
as of now naka stock muna sa house MX ko, ndi ko na pina-start bka lumaki
pa ang sira, anu kaya ang sira nya? bandang head ang tok-tok sound e
Click to expand...
nka uma timing gear kba sir? baka lumuang yng 2 bolt sa adjuster nya.. or baka my mali lng sa clearance..
 
shedric

shedric

Super Veteran
JapSpeed said:
nka uma timing gear kba sir? baka lumuang yng 2 bolt sa adjuster nya.. or baka my mali lng sa clearance..
Click to expand...
idol, after ko marinig ung tok-tok sound, pinatay ko na po makina tinulak ko na hanggang house,
tapos try ko I kick start andami pong nagtunugan banda sa head, san po kaya ang major
issue ng mc ko? tama lang po na wag ko na start dba? baka lalo masira engine parts?
head issue lng cguro un?
 
JapSpeed

JapSpeed

Super Veteran
shedric said:
idol, after ko marinig ung tok-tok sound, pinatay ko na po makina tinulak ko na hanggang house,
tapos try ko I kick start andami pong nagtunugan banda sa head, san po kaya ang major
issue ng mc ko? tama lang po na wag ko na start dba? baka lalo masira engine parts?
head issue lng cguro un?
Click to expand...
malamang head lng yn.. baka na pud2x na tip ng valves mo.. not sure.. pa tingin mo nlang. or DIY baklasin mo head cover para tignan kng intact pa yng mga valves mo.. pa tingin mo na sa magaling na doctor yn bro.. hehe
 
shedric

shedric

Super Veteran
JapSpeed said:
okay bro.. my lagnat lng yan.. hehe.. update lng bro kng ano sakit ng mx mo..
Click to expand...
idol, problem solved na MX ko,
yesterday we found out the cause of the tik-tik sound was the manual chain tensioner.
timing chain was loose causing valve clearance problem
both intake valves was been deformed, slight scratch on piston but still in good condition
we replaced new intake valves and valve seal, got my MX top overhaul,
repaired the manual chain tensioner, and now ok
 
You must log in or register to reply here.
Top