FG: X-PROJECT (SNIPER) VS. RANSPEED (X1R)..

[Fiat_01]

Saglit lang akong nwala para mag TRAINING BUMANGKING

hmmm..sir traxxas testing the 2012 yamaha sniper...hahahahaha...development rider.

- ayos sir traxx ah! hehehe..

 

[Rjloks]

@boss traxx.
gano ba katagal ang bakasyon mo dyan??? 1 or 2 months??? hahaha. kaya pala hnd ka masyadong active sa forum eh.
enjoy your trip... dahan dahan sa pag tingin sa mga nude girls. hehehe

 

[peakabu]

go papa traxx naway maibangking mo yn..haha

 

[bordzie]

ito yung address ng

HANS & AURIE MOTORCYCLE MART
353 RIZAL AVENUE EXTENSION
BETWEEN 9TH & 10TH AVENUE
GRACE PARK KALOOCAN CITY

TEL: 367-5991 OR 323-8668 OR 323-6886

from

http://www.motorcyclephilippines.com/fo ... p?t=126543

sayang di natuloy yung laro... mech ni dashi si ranspeed? ok ha...

 

[docgabby]

ito yung address ng

HANS & AURIE MOTORCYCLE MART
353 RIZAL AVENUE EXTENSION
BETWEEN 9TH & 10TH AVENUE
GRACE PARK KALOOCAN CITY

TEL: 367-5991 OR 323-8668 OR 323-6886

from

http://www.motorcyclephilippines.com/fo ... p?t=126543

sayang di natuloy yung laro... mech ni dashi si ranspeed? ok ha...

too late to know the address of the shop, when x project was pushing ranspeed to reveal where they should meet to hand over the earnest money he never appeared or try to contact to seal the deal.

 

[kr.r_sniper]

@doc ngmomodify ba kyo ng pang dailyuse na 150cc=))wag 200cc mabigat sa bulsa un=))

@xproject. we salute you sir bsta ikaw nagawa mo ung part mo...tama ang kasabihan kpag puro dada kulang sa GAWA=))anyway sna update mo kmi kpag may laban ka pra nman mapanood nmin ung HATAW ng SNIPER mo...hehehehe MORE POWER T135 and RIDE SAFE ALL...

 

[docgabby]

@doc ngmomodify ba kyo ng pang dailyuse na 150cc=))wag 200cc mabigat sa bulsa un=))

@xproject. we salute you sir bsta ikaw nagawa mo ung part mo...tama ang kasabihan kpag puro dada kulang sa GAWA=))anyway sna update mo kmi kpag may laban ka pra nman mapanood nmin ung HATAW ng SNIPER mo...hehehehe MORE POWER T135 and RIDE SAFE ALL...

i can recommend parts but i leave the tuning and set up to x project. i dont sell parts directly but i have sources.

 

[sniperzzero]

@doc

pwede po ba dito i-post ung mga most recommend parts nyo na 150cc pero pwede pang daily use? malaking tulong po ito sa mga nag babalak gustong mapabilis sniper nila. tska po mga magkano po aabutin ung price. TIA!

 

[docgabby]

this is my daily drive. panget.this holy week i am again taking it for a trip to manila. about 550kms.

 

[docgabby]

@doc

pwede po ba dito i-post ung mga most recommend parts nyo na 150cc pero pwede pang daily use? malaking tulong po ito sa mga nag babalak gustong mapabilis sniper nila. tska po mga magkano po aabutin ung price. TIA!

hmmmm..i if were to set up a 150cc sniper. this is what i would do. id purchase a vixion nikasil block, buy a hispeed spark135 57mm hi compression pro X piston. stock head ported and polished (ports not too big for increased velocity), stock valves and stock valves seat 3' 5' angle cut c/o precision racing for better flow. stock cams custom grind by camprofile, valve springs by a popular brand like yypang etc., cdi of your choice, carb 26mm or 28mm, open pipe not too big of course. there is an advance woodruf key available for mio, i still have to know whether there is one for sniper. tranny close ratio for super street. total cost, actually i dont know, but if i were given the choice these are the parts i will buy.

 

[deadhungry]

1k pa naman ako kay xproject.. ahahahaaha anu ba kontak ni xproject? pa pm naman mga paps mag sescret deal lang kami hihii

 

[Fiat_01]

@doc

pwede po ba dito i-post ung mga most recommend parts nyo na 150cc pero pwede pang daily use? malaking tulong po ito sa mga nag babalak gustong mapabilis sniper nila. tska po mga magkano po aabutin ung price. TIA!

hmmmm..i if were to set up a 150cc sniper. this is what i would do. id purchase a vixion nikasil block, buy a hispeed spark135 57mm hi compression pro X piston. stock head ported and polished (ports not too big for increased velocity), stock valves and stock valves seat 3' 5' angle cut c/o precision racing for better flow. stock cams custom grind by camprofile, valve springs by a popular brand like yypang etc., cdi of your choice, carb 26mm or 28mm, open pipe not too big of course. there is an advance woodruf key available for mio, i still have to know whether there is one for sniper. tranny close ratio for super street. total cost, actually i dont know, but if i were given the choice this are the parts i will buy.

- wow..tnx doc.. :mrgreen:

 

[kr.r_sniper]

@doc

pwede po ba dito i-post ung mga most recommend parts nyo na 150cc pero pwede pang daily use? malaking tulong po ito sa mga nag babalak gustong mapabilis sniper nila. tska po mga magkano po aabutin ung price. TIA!

hmmmm..i if were to set up a 150cc sniper. this is what i would do. id purchase a vixion nikasil block, buy a hispeed spark135 57mm hi compression pro X piston. stock head ported and polished (ports not too big for increased velocity), stock valves and stock valves seat 3' 5' angle cut c/o precision racing for better flow. stock cams custom grind by camprofile, valve springs by a popular brand like yypang etc., cdi of your choice, carb 26mm or 28mm, open pipe not too big of course. there is an advance woodruf key available for mio, i still have to know whether there is one for sniper. tranny close ratio for super street. total cost, actually i dont know, but if i were given the choice this are the parts i will buy.

@docgabby tnx doc...hehehehe idol na kita=))saglit p lng aq sa forum pero marami na akong natutunan sayo pagdating sa modification ng engine...lalo na sa ENGLISH=))ahahahahaha


tnx po ulit ng marami sa inyo at sana ipagpatuloy nyo pa po ung mabuti nyong gawain=))WE SALUTE YOU SIR!!!HANDS DOWN...RIDE SAFE PO!!!

 

[docgabby]

@doc

pwede po ba dito i-post ung mga most recommend parts nyo na 150cc pero pwede pang daily use? malaking tulong po ito sa mga nag babalak gustong mapabilis sniper nila. tska po mga magkano po aabutin ung price. TIA!

hmmmm..i if were to set up a 150cc sniper. this is what i would do. id purchase a vixion nikasil block, buy a hispeed spark135 57mm hi compression pro X piston. stock head ported and polished (ports not too big for increased velocity), stock valves and stock valves seat 3' 5' angle cut c/o precision racing for better flow. stock cams custom grind by camprofile, valve springs by a popular brand like yypang etc., cdi of your choice, carb 26mm or 28mm, open pipe not too big of course. there is an advance woodruf key available for mio, i still have to know whether there is one for sniper. tranny close ratio for super street. total cost, actually i dont know, but if i were given the choice this are the parts i will buy.

@docgabby tnx doc...hehehehe idol na kita=))saglit p lng aq sa forum pero marami na akong natutunan sayo pagdating sa modification ng engine...lalo na sa ENGLISH=))ahahahahaha


tnx po ulit ng marami sa inyo at sana ipagpatuloy nyo pa po ung mabuti nyong gawain=))WE SALUTE YOU SIR!!!HANDS DOWN...RIDE SAFE PO!!!

ngeh...hahahaha. doctor mechanic daw ako hindi lang sa tao....hehehehe. mga kaibigan kong riders dito sa legaspi takot sa akin dahil sabi ko pag naaksidente sa motor..putol agad kahit gasgas....dok putol daw ako..hehehehehe

 

[yanski]

kaya nga ranspeed.. he RUN away with SPEED... (USE YOUR IMAGINATION)

 

[Fiat_01]

- katatakutan ka nga dyan doc..hehehe.. cguro ang baba po ng rate ng motor accidents dyan sa inyo? takot maputulan eh..

 

[Fiat_01]

- maiba tyo mga paps..back to topic, tuloy ba tong FG after ng legal race nina ranspeed? anong update sa side nila? :?:

 

[docgabby]

- katatakutan ka nga dyan doc..hehehe.. cguro ang baba po ng rate ng motor accidents dyan sa inyo? takot maputulan eh..

unfortunately mataas po. at least 3-5 deaths per month due to severe head injuries complicated by alcohol intoxication. majority dont wear a helmet...

 

[kayode]

BTT... i think matutuloy to... may developments on the side.. i can't divulge the specifics...

its brewing... brewing... abang lang tau...

:lol:

 

[Fiat_01]

BTT... i think matutuloy to... may developments on the side.. i can't divulge the specifics...

its brewing... brewing... abang lang tau...

:lol:

- very very very nice...may aabangan na tlga tyo! :twisted: :twisted: :twisted: