• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Removing Base Gasket On Stock Bore???

botsok

Super Veteran
if removing head gasket, make sure that the piston will not hit the valves.. just an opinion...
if needed, just do some valve pockets..
 

botsok

Super Veteran
stock bore stock cams. is it still necessary to have valve pocket if removing base gasket?
i tried kawahara stage 1 cams with no base gasket on a stock bore...with no valve pocket. POG POG POG POG POG POG,, hehehe:D
 

ianghol

Super Veteran
i tried kawahara stage 1 cams with no base gasket on a stock bore...with no valve pocket. POG POG POG POG POG POG,, hehehe:D
what do you mean by POG POG POG POG sir?..is it scary POG POG POG sound of your pipe or scary POG POG POG of piston hitng the valves?:D
 

raksta

Super Veteran
:).... i have this on my bike!! so far it is still running the question is if you could put your bike engine together after removing it..
 

lyllekent

New Member
wat about 62mm block removing base gaskit it is safe or not?wats the best put a base gaskit in stalling 62mm block or remove base gaskit.can u pls help
 

sixty-thirty

Super Veteran
If I use a faito turbo cam with stock bore and remove the bottom gasket it will be fine too ? This is very intresting . Please reply
 
Top