Jvt 57mm, 59mm & 62mm Lc Kit For Sniper Chrome Bore W/ Forged Piston

[yosnad]

buti ka pa papzz nka jack up..sa smx wla pang available..ok na yan sa 57mm nasa 170.2cc displacement mo..try mo vixion para matibay same price yata sa jvt na 57mm dn..check mo dn oil level mo papz..mataas na ang 4mm na jack up baka kumunti ang oil d mo napansin at d na maabot ang bandang taas ng bore kaya nag kulang sa lubrcation kaya nag over heat..

meron ng available na faito jack up rod for smx sir smx yong akin...bagong change oil ako sir.. bumili aku ulit jvt sir tingnan ko kung factory defect lng ba talaga yong una kong nabili..check mo faito site sir meron na cla for smx

 

[ianghol]

meron ng available na faito jack up rod for smx sir smx yong akin...bagong change oil ako sir.. bumili aku ulit jvt sir tingnan ko kung factory defect lng ba talaga yong una kong nabili..check mo faito site sir meron na cla for smx

prob ko is panu ako ma bili ng faito jack up..parang mas mahal yata kung direct galing sa ibang bansa..magkanu mo nmn nabili papaz?..kung meron lng sana dito tagal na sana ako bili,,

 

[traxxas-modifier]

what is your cdi?
@40kph and below speed, magooverheat makina mo nyan lalo na
ang aftermarket cdi mo hinde supported ang radiator fan...
marami nang cdi ngayon na hinde nagsusuport ng radiator fan.

when you breakin your engine, run it hard

anyway, bakit hinde ka nag vixion bore if, 57mm ang gusto mo?
ako naka uma now 62mm. If meron lang sana diasil 62mm ang yamaha
eh yang pure yamaha kukunin ko iba pa rin ang diasil...

i havent tried jvt on sniper so no experience on it...
cguro natimingan lang...

my suggestion is if below 57mm go for genuine yamaha bore.
sulit na sulit.
beyond 60mm choose according sa budget mo ...

 

[yosnad]

what is your cdi?
@40kph and below speed, magooverheat makina mo nyan lalo na
ang aftermarket cdi mo hinde supported ang radiator fan...
marami nang cdi ngayon na hinde nagsusuport ng radiator fan.

when you breakin your engine, run it hard

anyway, bakit hinde ka nag vixion bore if, 57mm ang gusto mo?
ako naka uma now 62mm. If meron lang sana diasil 62mm ang yamaha
eh yang pure yamaha kukunin ko iba pa rin ang diasil...

i havent tried jvt on sniper so no experience on it...
cguro natimingan lang...

my suggestion is if below 57mm go for genuine yamaha bore.
sulit na sulit.
beyond 60mm choose according sa budget mo ...

brt yong cdi ko sir and i think parang supported yong radiator fan nya sir kasi pag uminit umaandar ng kanya yong fan..bumili nga aku ulit ng 57mm ng jvt parin tinry ko ulit baka factory defect lng sir... current set up is faito s4evo cams, jvt valve spring, faito lighten valve, ported head, faito crankshaft jack up rod 4mm, kitti clutch spring, 28mm keihin pnp and jvt coil and 57mm jvt bore...

 

[traxxas-modifier]

brt yong cdi ko sir and i think parang supported yong radiator fan nya sir kasi pag uminit umaandar ng kanya yong fan..bumili nga aku ulit ng 57mm ng jvt parin tinry ko ulit baka factory defect lng sir... current set up is faito s4evo cams, jvt valve spring, faito lighten valve, ported head, faito crankshaft jack up rod 4mm, kitti clutch spring, 28mm keihin pnp and jvt coil and 57mm jvt bore...

baka nga na timingan lang na factory defect.
marami rin naman gumagamit ng JVT na walang problema.
lahat naman ng products meron talaga a little percentage na may factory defect.

even yamaha, my very first sniper binigay sakin may factory defect din
see this video of mine 6 years ago

 

[yosnad]

baka nga na timingan lang na factory defect.
marami rin naman gumagamit ng JVT na walang problema.
lahat naman ng products meron talaga a little percentage na may factory defect.

even yamaha, my very first sniper binigay sakin may factory defect din
see this video of mine 6 years ago

okay.. salamat ng marami sir...

 

[Eldridge]

Sir traxxas pahelp nmn po sa sniper mx ko. Kc po dmi n nyang set pero ang topspeed ko lng ay 130 kph.. Pero ung 0 to 120 saglit lng ..tpos dhan dhan n hanggang 130..eto po set ko. Jvt 59mm chromebore, uma cams 5.8 lift, hi speed valve spring, 28mm orig keihin, port n polished,brt dualband cdi,jvt ignition coil, lightened balancer. Stock sprocket po ako 14 x 39 po. Salamat sir traxxas

 

[Eldridge]

Up ko lang po!

 

[jimpie]

yes, isa ako sa may gamit ng JVT 62mm wala namn ako naranasan problem. halos 5months na ata ito kong hindi ako nag kakamali, na try ko ito 400km no sign over heating... stable performance.... waswas mode din ako at pang araw araw na pamasok sa work. 50km balikan 200php na gas 3days may sobra pa pang gala heheh

 

[jimpie]

hahah... si jangbest watch mode lang

 

[jangbest]

hahah... si jangbest watch mode lang

hehehe ..

 

[Kenneth Roy M. Caberto]

this is what happens to my jvt 57mm borekit on honing stage...i dont go beyond 40kph and my jettings are 130 42..View attachment 26817View attachment 26818View attachment 26818View attachment 26818View attachment 26818View attachment 26818View attachment 26818View attachment 26818View attachment 26818

baka naman nasobrahan yan sa compression ratio yan sir,, try mo kaya dagdag ng base gasket or use vixion kit. icheck mo din yung engine bearing mo baka maluwang na ung clearance. its safer kung iset mo muna siya ng lower compression since tumaas naman n ung stroke ng engine mo.

 

[rc_boi04]

I agree JVT durability Cylinder block set, currently installed JVT 62mm block set together with J-10 camshaft before Panagbenga festival .. after installation, future trip to Baguio via kayapa immediately .. no leaks or even over heat .. very Satisfied to this kind of item!

I agree JVT durability Cylinder block set, currently installed JVT 62mm block set together with J-10 camshaft before Panagbenga festival .. after installation, future trip to Baguio via kayapa immediately .. no leaks or even over heat .. very Satisfied to this kind of item!

Sir please tell us about your mods on your head.. Ty.. Ride for life

I agree JVT durability Cylinder block set, currently installed JVT 62mm block set together with J-10 camshaft before Panagbenga festival .. after installation, future trip to Baguio via kayapa immediately .. no leaks or even over heat .. very Satisfied to this kind of item!

 

[rc_boi04]

How much is the 59mm kit ty

 

[rc_boi04]

Can you tell me about your pj and mj used? Ty

 

[rc_boi04]

for stock valves, long drives, stock carb (rejet) high revs: 59mm for me. much more safer than 62mm =)

size of pj mj did you use? Ty

 

[ianghol]

size of pj mj did you use? Ty

bro kung 28mm carb mo try mo pilot xng mio #38..kag bakal ka lng main jet xng toyota 4k #115

 

[Mr.Neon]

mga paps pa pm nman ng price ng jvt 59mm thanks

 

[Sniper 03]

What is much better crome bore or ceramic? And what is the diference of two? Advatage and dis advatage help mga paps... Give me info tnx

 

[antibiotic404]

sir mon how much 59? pa PM. tnx