How to make your stock bore 135cc goes to 135-140kph

[traxxas-modifier]

How to make your stockbore runs from 135 to 140kph (philippine/indonesian specs) with GPS of 128kph

Hi all,

We all know that the 100% stock T135 can reach average speed of 115kph(gps speed of 105kph)
Some also can reach 120kph (gps of 110kph)

The goal of the YamahaT135 forum is to share knowledge on how to make the T135 bike maximized its capabilities and unleash its power!

So with the help of the forumers, I am sharing this guaranteed modification
on how to make your T135 maximize its performance on a stock 135cc bore. Thanks to you guys for sharing all the mods and tips thus i am applying this and showing the video.


This is for educational purposes shared to you.

T135 all stock topspeed
http://www.youtube.com/watch?v=jAQfTs8u61E
[flash width=480 height=385]http://www.youtube.com/v/jAQfTs8u61E?fs=1&hl=en_US[/flash]


and if you want more speed, Modding T135 bike with
Specs as follows
-Stock bore 135cc (not modified)
-stock head (not modified)
-stock front tire 70/90x17
-stock rear tire 80/90x17
-stock sprocket 15/39
-stock carb VM22 (22mm) on stock airbox
-rextor cdi
-vixion valvespring
-r9 exhaust pipe
-kawahara K1 racing camshaft
-removed the decompression pin
-protec groundstrap racing coil

Test site: around 2kms stretch (plain leveled road)

Checking the Top Speed
http://www.youtube.com/watch?v=-4LeXpQoA6s
[flash width=480 height=385]http://www.youtube.com/v/-4LeXpQoA6s?fs=1&hl=en_US[/flash]



Checking the RPM vs Every Gear Speed
http://www.youtube.com/watch?v=PNpCjsR-n9M
[flash width=480 height=385]http://www.youtube.com/v/PNpCjsR-n9M?fs=1&hl=en_US[/flash]


The video shows that the T135 bike can reach 140kph (GPS of 128kph) or more!
The above specs is just an example and it works on our test bike.


Some other brand parts can also give same or much better power or poor power,
You just have to experiment and try and compare all of it.


You can also use sniper31's tried and tested super-hilift racing camshaft what they
called "pan-asean cam". You just have to be careful on pan-asean superhilift cam when installing.


If you want more speed
you can use other mods like bigbore kit, highflow airfilter, bigcarb 26mm or bigger,
head porting, removing base gasket, etc..


Hope that this video will help you especially the newbies and veterans
afraid of modding their beloved bike

MOD YOUR BIKE NOW!

 

[ghotichooder]

if stock 135cc can goes up to 140kph on ur speedo...how much speed can vixion block gives to our bike???...any idea?

 

[Mono]

aw!

lets say i have a stock pipe and stock carb sir traxx..what jetting should i use?
would keihin jetting fits? say main jet is 105? how about the pilot jet?

my bike has 80/80 front and 90/80 rear tire.. 15/40 sprocket..all stock.

 

[thopiang]

my bike gets only 125 topspeed on my speedo hehehe, ma try nga ito master job hehehe


anyway, nice share

oh mga papi, di na secret yung mga secret mods, ayan na oh!!! hehehe

 

[BuZzMoNk3y]

thats another story and atudy right sir traxx?hehehe

 

[traxxas-modifier]

@ghotic
it will give more than that. estimated 150+ kph
using stock tires.

@monoshock
change to open pipe, if you use stock pipe
stay stock jets for AC.

@thopiang
hehehe 2nd gear

 

[BuZzMoNk3y]

@traxxas-im comin at yah!!1400hrs ill be there..hehehe

 

[jmoquin]

yypang longy(big elbow) can be also used ? rather than r9 pipe?
-rextor cdi
-vixion valvespring
-kawahara K1 racing camshaft(plug n play?)
-protec groundstrap racing coil

 

[jamskie]

wow! nice video sir traxxas..i want to copy that modifications..simple modifications, great improvement..

 

[Mono]

lols jamskie.. that modification is yours right>? hehehe

 

[phl6684]

nice ino there sir admin...
here i want to share my setup

stock bore..54mm
stock head..
CMS valve spring and camshaft..
stock setup valve clearance in 0.10 ex 0.15
Ori Thai black racing CDI-stock cdi lookalike
stock carb...increase jettings to 115mj pj 22.5
protec groundstrap racing coil..
airbox filter just remove the paper..box still intact
nob1 3bold series exhaust..
sprocket 15-37

top speed of my lc "not too acurate" speedo=185km/h at 11k rpm
-peace-

 

[traxxas-modifier]

@jmoquin
yes you can use any pipes you want .
it just so happen that we have r9 and ahm available for use here.

the kawahara cams is plugnplay.
you just need to install camshaft bearing.
also you can removed the decomp pin.


@phl
thanks for sharing bro

 

[chiglai]

whats the problem with my bike? no top speeding?

 

[traxxas-modifier]

@chiglai
no topspeed?
ask your backride wife why you cant do topspeed

 

[Mono]

@jmoquin
yes you can use any pipes you want .
it just so happen that we have r9 and ahm available for use here.

the kawahara cams is plugnplay.
you just need to install camshaft bearing.
also you can removed the decomp pin.


@phl
thanks for sharing bro

Sir traxx..if i install kawahara cams..where can i get the camshaft bearing??

 

[cheetah]

You can get it from your stock Camshaft bearing. Just carefully remove it.. or you can purchased one... Yamaha camshaft stock bearings are from china

 

[cheetah]

Any open pipe will do as long as it have bigger elbow than the stock pipe.

 

[cheetah]

wow! nice video sir traxxas..i want to copy that modifications..simple modifications, great improvement..

That's your bike right? hehehe :evil:

 

[sniper_eds]

@ sir traxxas... just want to know. how much the cost of the modification? my HC 2010 sniper is all stock except rear tire which im using 100/80 tubeless but i can attain 120kph. 3rd gear can attain 110kph.

 

[traxxas-modifier]

cheetah is right, you can use the stock bearing of stock cams
but i suggest to buy a new bearing from any hardware/bearing centers.


@snipereds
pm me