| Author |
Message |
haen
 ACTIVE MEMBER
Joined: 29 Mar 2007
Posts: 784
Age: 36
Location: INDONESIA
Modification Specs: PROTEC GROUND COIL + CRYO'ed PLUG, TDR + REXTOR CDI, DAYTONA KEVLAR Clutch Plate, 62 mm SPECIAL BLOCK, TK RACING Valve Spring, MIKUNI TM28 SUDCO, TDR CONE AIR FILTER, KITACO SHOCK, SINNOB SPROCKET, A LITTLE MOD HERE AND THERE, R9 MUGELLO NG, 22/19 BIG VALVE HEAD FLOWBENCH PORTED, SPECIAL POWER CAM, H.I.D HI-LO HEADLAMP

|
|
150 CC DIASIL SPECIAL RECIPE PACKAGE :
150 cc KIT touched and TUNED on some parts by me (after Jan 1 st, 2009 purchases)
+
This CAM
+ VALVE SPRING
DYNO TEST spec :
Mikuni TM28 PJ 17,5 MJ 215
TDR Cone Air Filter + stock airbox
CLD Competition Pipe Header + NOB1 3BOLD silencer
Power Cam 5.8
Cryogenic Vixion Valve Spring
Head 22/19 Flowbench ported
Intake Kitaco
CDI TDR + Rextor
Final Gear 15-39
Gearbox Close Ratio :
1st - 33/13
2nd - 29/17
3rd - 23/17
4th - 23/21
FAG Hi Speed bearing
The kit are :
KIT UPDATE
PACKAGE I : 150 cc KIT
1. BASIC KIT
1. Piston ring set
2. Piston kit
3. Piston pin
4. Cyl block
5. Cyl gasket (lower)
6. Cyl head gasket
7. Water Pump O-ring
8. STAGE 2 CAM
9. Circlip
10. Valve Spring
2. 150 cc TUNED UP KIT, BIG VALVE HEAD READY with modification at :
1. Modified piston
2. Shaved block
3. SPECIAL POWER CAM 5.8 mm lift in replacement of the Stage 2 cam
4. Protec GROUND ULTIMATE coil
DYNO TEST RESULT FOR THE TUNED UP KIT with ABOVE TEST SPEC
ALL ORIGINAL PARTS !!! contact me by email for pricing and shipping..
PACKAGE II : 178 CC 62 MM KIT (BLOCK, PISTON, PISTON WRIST PIN, PISTON RING SET)
Description : 62 mm forged piston, special steel bore, water jacket, piston rings, piston pin, gaskets
still use stock 14 mm conrod plug and ride
Special 62 mm forged piston with special cyl block.. no leak, no heat up issues
PIC HERE : http://www.facebook.com/photo.php?pid=4221883&id=320505998430
DYNO TEST RESULT
Uploaded with ImageShack.us
PACKAGE III :188 CC KIT (BLOCK, CONROD, PISTON, PISTON WRIST PIN, PISTON RING SET
Description : 64 mm piston, special steel bore, water jacket, piston rings, piston pin, conrod 15 mm pin hole
NOTE : for 178 and 188 cc KIT, THE VALVE SPRING and POWER CAMSHAFT are INCLUDED
Instantly you'll get 150cc, 178 cc and superb acceleration...but the best thing is...
IT'S TROUBLE FREE AND POWER PROVEN YET STILL SAFE FOR DAILY AND LONG RIDE !!!
These came from a long research which costs time, money and lot of effort..
NEW ! CRYO TREATMENT at small ADDITIONAL COST
What's to be treated ? Here they are :
1. Piston
2. Piston ring
3. Piston pen
4. Cyl block
and what is this CRYO TREATMENT actually ?
Read here :
http://www.metal-wear.com/
pm me for price..
Guaranteed to make u cry... gear two on my 86kg weight reaches 85 km /h FAST !!! EDIT : now my weight is 92 kgs... :D
So there's what are available for now..
I'm on Indonesia..
Pay by PayPal, wiretransfer or Western Union
contact pm or Yahoo messenger ID haentiara
|
|
|
|
Last edited by haen on Mon Jul 19, 2010 10:58 pm; edited 45 times in total
|
|
 |
     |
|
haen
 ACTIVE MEMBER
Joined: 29 Mar 2007
Posts: 784
Age: 36
Location: INDONESIA
Modification Specs: PROTEC GROUND COIL + CRYO'ed PLUG, TDR + REXTOR CDI, DAYTONA KEVLAR Clutch Plate, 62 mm SPECIAL BLOCK, TK RACING Valve Spring, MIKUNI TM28 SUDCO, TDR CONE AIR FILTER, KITACO SHOCK, SINNOB SPROCKET, A LITTLE MOD HERE AND THERE, R9 MUGELLO NG, 22/19 BIG VALVE HEAD FLOWBENCH PORTED, SPECIAL POWER CAM, H.I.D HI-LO HEADLAMP

|
|
 |
     |
|
glenah
 NEWBIE
Joined: 16 Dec 2006
Posts: 101

Age: 32
Location: cebu
Modification Specs: stock ...

|
|
|
just asking , how about the timing chen?
|
|
|
|
|
|
 |
       |
|
haen
 ACTIVE MEMBER
Joined: 29 Mar 2007
Posts: 784
Age: 36
Location: INDONESIA
Modification Specs: PROTEC GROUND COIL + CRYO'ed PLUG, TDR + REXTOR CDI, DAYTONA KEVLAR Clutch Plate, 62 mm SPECIAL BLOCK, TK RACING Valve Spring, MIKUNI TM28 SUDCO, TDR CONE AIR FILTER, KITACO SHOCK, SINNOB SPROCKET, A LITTLE MOD HERE AND THERE, R9 MUGELLO NG, 22/19 BIG VALVE HEAD FLOWBENCH PORTED, SPECIAL POWER CAM, H.I.D HI-LO HEADLAMP

|
|
|
timing chain ? what about it ? all the timing parts are same as our T135, part code and physical attributes are identical to every bit of it.. yamaha only added a small chain plastic cover part, coded 3C1-E2256-00 just for additional accessory..
|
|
|
|
|
|
 |
     |
|
surkrew
 NEWBIE
Joined: 03 Apr 2007
Posts: 319

Age: 26
Location: Kiulap / Bukit Beruang, Tutong
Modification Specs: 150cc vixion block 58mm piston, super cam, racing cdi, racing valve spring, racing clutch spring, Kevlar clutch plate, uma 28mm carb, YSS rear shocks, Dunlop tt900 (80/80 front & 90/80 rear) and yy pang racing exhaust, 14-45 sprocket

|
|
|
pm me the price dude.. including shipping to brunei..
|
|
|
|
|
|
 |
      |
|
glenah
 NEWBIE
Joined: 16 Dec 2006
Posts: 101

Age: 32
Location: cebu
Modification Specs: stock ...

|
|
|
ahh ic .. thanks . and how much is that?
|
|
|
|
|
|
 |
       |
|
zerocool
 NEWBIE
Joined: 29 Dec 2007
Posts: 2
Age: 27
Modification Specs: nothing

|
|
|
pm me the price including shipping to singapore
|
|
|
|
|
|
 |
      |
|
CryptonX
 NEWBIE
Joined: 01 Sep 2007
Posts: 461
Age: 20
Location: crete
Modification Specs: removed the euro3 catalizer 14tfront sprocket and hard brake in :P

|
|
look at the piston its not a high performance one its a piston for long live
|
|
|
|
|
|
 |
     |
|
haen
 ACTIVE MEMBER
Joined: 29 Mar 2007
Posts: 784
Age: 36
Location: INDONESIA
Modification Specs: PROTEC GROUND COIL + CRYO'ed PLUG, TDR + REXTOR CDI, DAYTONA KEVLAR Clutch Plate, 62 mm SPECIAL BLOCK, TK RACING Valve Spring, MIKUNI TM28 SUDCO, TDR CONE AIR FILTER, KITACO SHOCK, SINNOB SPROCKET, A LITTLE MOD HERE AND THERE, R9 MUGELLO NG, 22/19 BIG VALVE HEAD FLOWBENCH PORTED, SPECIAL POWER CAM, H.I.D HI-LO HEADLAMP

|
|
|
not a long life only crypton, it was designed that way so the valve lift can be increased 1 mm more than stock T135, but that if using V-Ixion's camshaft, that's why if we're upgrading the block only without camshaft change, the improvement is just mild
|
|
|
|
|
|
 |
     |
|
dennis_808
 NEWBIE
Joined: 04 Aug 2007
Posts: 75
Location: Philippines
Modification Specs: modified rider

|
|
|
hi haen,can you pm me the details about how to order the kit from your place and shipping.tnx!
|
|
|
|
|
|
|
      |
|
charge
 NEWBIE
Joined: 13 Apr 2007
Posts: 295
Age: 27
Location: Penang

|
|
|
a quick question. from Vixion spec, we need 1.2L of engine oil, but T135 only got 0.8L tank. Where to get the tank?
|
|
|
|
|
|
 |
    |
|
pange_air
 NEWBIE
Joined: 23 Dec 2007
Posts: 4
Age: 28
Modification Specs: Yamaha LC

|
|
pm me the best price include shipping to malaysia
|
|
|
|
|
|
 |
    |
|
rudduan
 REGULAR MEMBER
Joined: 13 Feb 2007
Posts: 1917

Age: 23
Modification Specs: stock model

|
|
| charge wrote:
|
|
a quick question. from Vixion spec, we need 1.2L of engine oil, but T135 only got 0.8L tank. Where to get the tank?
|
no need to get tank,just add full 1liter of the engine oil,empty the bottle
|
|
|
|
|
|
 |
     |
|
anthonyvinh
 NEWBIE
Joined: 20 Sep 2007
Posts: 1
Modification Specs: kitti exhaust pipe.

|
|
|
i'm in Vietnam, how to buy Vixion Block,pm price include shipping, thanks
|
|
|
|
|
|
| |
    |
|
D'Expert
 NEWBIE
Joined: 20 Feb 2008
Posts: 18
Age: 41
Modification Specs: Yamaha Sniper

|
|
|
pls p.m. about price including shipping.
|
|
|
|
|
|
 |
    |
|
haen
 ACTIVE MEMBER
Joined: 29 Mar 2007
Posts: 784
Age: 36
Location: INDONESIA
Modification Specs: PROTEC GROUND COIL + CRYO'ed PLUG, TDR + REXTOR CDI, DAYTONA KEVLAR Clutch Plate, 62 mm SPECIAL BLOCK, TK RACING Valve Spring, MIKUNI TM28 SUDCO, TDR CONE AIR FILTER, KITACO SHOCK, SINNOB SPROCKET, A LITTLE MOD HERE AND THERE, R9 MUGELLO NG, 22/19 BIG VALVE HEAD FLOWBENCH PORTED, SPECIAL POWER CAM, H.I.D HI-LO HEADLAMP

|
|
|
hi anthony, hi d'expert.. check ur PM please
|
|
|
|
|
|
 |
     |
|
unlimited express
 ACTIVE MEMBER
Joined: 06 Dec 2007
Posts: 707

Modification Specs: ... stock ang driver....

|
|
|
hey haen, did you get my inquiries? could you PM me for the price including the shipping to Philippines please. will I get all the stuff in the picture and everythin mentioned above? Thanks dude...
|
|
|
|
|
|
|
    |
|
haen
 ACTIVE MEMBER
Joined: 29 Mar 2007
Posts: 784
Age: 36
Location: INDONESIA
Modification Specs: PROTEC GROUND COIL + CRYO'ed PLUG, TDR + REXTOR CDI, DAYTONA KEVLAR Clutch Plate, 62 mm SPECIAL BLOCK, TK RACING Valve Spring, MIKUNI TM28 SUDCO, TDR CONE AIR FILTER, KITACO SHOCK, SINNOB SPROCKET, A LITTLE MOD HERE AND THERE, R9 MUGELLO NG, 22/19 BIG VALVE HEAD FLOWBENCH PORTED, SPECIAL POWER CAM, H.I.D HI-LO HEADLAMP

|
|
|
hey unlimited.. i already sent u reply.. dunno somehow the system didnt send it..
|
|
|
|
|
|
 |
     |
|
unlimited express
 ACTIVE MEMBER
Joined: 06 Dec 2007
Posts: 707

Modification Specs: ... stock ang driver....

|
|
|
    |
|
D'Expert
 NEWBIE
Joined: 20 Feb 2008
Posts: 18
Age: 41
Modification Specs: Yamaha Sniper

|
|
|
Haen, may i know if i need to modify something to enable to accomodate the vixion block?
|
|
|
|
|
|
 |
    |
|
|
|
|
Goto page 1, 2, 3 ... 19, 20, 21 Next
topicviewbottom
|
View next topic
View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|